As a Production Sharing Contractor for BPMIGAS, we operate many producing and exploration blocks in Indonesia. To support our expanding operations in Indonesia, ConocoPhillips is looking for talented Indonesian nationals to fill in the following positions.
WARRANTY COORDINATOR
BASIC PURPOSE:
• This position is to provide proper documentation with high technical English writing as required to be attached in the system or equipment warranty claim process.
• Involve in developing proper documentation of equipment history record to get clear path forward whether Ops repair or project or vendors warranty issues whenever defect occurred.
• Utilize this position as a development opportunity to learn Engineering & Operational requirements through all phases of the project up to Operations start-up
• Support & Implement the Eastern Hub Operations & Maintenance Philosophy
• Be an active member and participant of the Project Management Team
• Actively participate to define Root Cause Failure of any defect parts or equipment since Commissioning through Start-Up and handover of Projects to Operations.
• Influence common Eastern Hub Operating Systems for all projects to ensure better Operations and Maintenance in the future, so high cost for preliminary Operation of manning and training can be minimized.
QUALIFICATION/EXPERIENCE:
• Must have minimum S1 degree or ideally related D3 degree with 10 years experience in oil and gas industry
• Should have experience and knowledge of oil, gas and production facilities (i.e. ASME, API, ASTM, Cause & Effects and P&ID’s)
• Actively seek knowledge transfer from outside experts
• Must be able to read, write and communicate effectively in English
• Demonstrate leadership by actively participating in COPI HSE MS and safety/environmental programs
• Must have good analytical thinking and ability to perform with minimum supervision
• Must have good interpersonal skills
• Must be independent as well as a good team player.
• Ability to sustain good working performance under pressure.
• High level of computer literacy, and creativity.
OFFSHORE SERVICE ENGINEER
BASIC PURPOSE:
• To ensure offshore compression and power generation units are maintained at high quality and operated optimum condition by providing guidance and direction to Offshore Maintenance and Operation personnel.
• To observe visually condition and performance of offshore compression and power generation units.
• To minimize unscheduled shutdown of offshore compression and power generation units by doing immediate troubleshooting.
• To execute recommendation or instruction given by Performance Monitoring team
• To inspect, analyze/ interpret and report condition of gas turbines and major/ critical rotating equipment.
• To provide QA/QC for major/ critical rotating equipment work at site (onshore and offshore) or at workshop.
• To develop and coach Maintenance personnel to be fully aware with high quality inspection.
• Position is to replace Rolls Royce Offshore Service Engineers under LTSA contract with national COPI staff
QUALIFICATION/EXPERIENCE:
• BS in Mechanical or Instrument engineering with strong in instrument and mechanical system.
• At least 3 years experience in maintenance and operation of in NDT, boroscope inspection and alignment, gas turbine control, compressor control, PLC, DCS, SCADA, protection system and other instrumentation.
• Familiar with oil and gas process operation and maintenance. Experience in Offshore oil & gas facility is preferred.
• Familiar with gas turbine, compressor and major rotating equipment anatomy.
• Have extensive troubleshooting experience and sense of urgency.
• Good communication in English (speaking & writing)
MAINTENANCE ELECTRICAL ADVISOR
BASIC PURPOSE:
The Maintenance Support Engineer shall provide technical support to COPI offshore oil and gas installations operating in the Natuna Sea. Primarily responsible for providing Electrical expertise including Heating ventilating Air Conditioning, performing reliability analysis, fault finding and mentoring to the Offshore Electrical maintenance team.
QUALIFICATION/EXPERIENCE:
• Ability to Technical Degree (BSc or MSc in applicable Engineering discipline) or Technical Diploma level (D3/D4)
• 10 years experience in Electrical Maintenance and Operation preferably in the offshore Oil and Gas industry. A working knowledge of Gas Turbines (RR Avons, RB211’s ) centrifugal gas compressors, pumps and motors would be an advantage. Should be knowledgeable in offshore production operations and maintenance of equipment as well as logistics and planning.
• Demonstrate strong written and oral communication skills in both Indonesian and English.
• Proficient computer skills including literacy in Windows and SAP systems.
• Knowledgeable in writing and interpreting technical reports.
• Self directed, motivated to achieve team goals, customer oriented and capable of working independently with minimal supervision.
• Analytical capabilities including problem solving, trouble shooting capability and knowledge of QA/QC procedures.
• Ability to work in an unstructured team environment including surfacing and resolving conflicts, demonstrating facilitator skills, accepting accountability, delivering on commitments, engendering trust and providing peer feedback.
• Ability to manage change, drive Continuous Improvement and lead by influence.
• Knowledge of Reliability Integrity processes and tools i.e. RCM, Defect Elimination, RCFA, and Pareto.
• Knowledge and understanding of Condition Monitoring Techniques.
• Mentor /Training and Networking skills.
LAB TECHNICIAN
BASIC PURPOSE
To take samples, do lab analysis, and report the result safely, correctly, accurately and timely manner to support offshore operation in monitoring production/plant performance as well as lab supporting data for engineering, product specifications and environmental monitoring purposes
JOB REQUIREMENT
• Chemical Analyst High School with minimum 3 years experience or D3/S1 chemical analyst with minimum 1 year experience at oil & gas industry or relevant industries
• Experienced in operate major oil & gas Laboratory equipment and familiar with related lab analysis procedures
• Good interpersonal skill and strong team player
• Computer literate and good in English
• Offshore field base for 2 weeks and beyond if required
• Ability to work under diverse cultures and offshore working conditions
• Possibility to mobile from one area/field to another area/field
• Ability to set-up, install, calibrate, and operate a new lab instrument individually
• Troubleshooting of lab instruments
Only those individuals who fully meet the above requirements need apply. Write down THE POSITION TITLE you apply in the subject of your email. Send your application and CV not later than two weeks after the publication of this advertisement to RSCJakartaRecruitment@conocophillips.com
electrical & mechanical technician for Africa
It is informed to those who interested to work overseas that there will be writting test and interview on Saturday-Sunday, 18-19 April 2009 for electrical and mechanical technicians.
Min score of writting test must be 65%. No interveiw for the applicant who fails to get the lowest limit.
For electrical technician, the subjects of writting test are : basic knowledge of electrical, alternators, transformers, motor & motor control, engine controls, power, electronics, protection & safety.
The subjects of mechanical technician tests are about 4 stroke cycle, low engine power output, turbo charging, engine smoke, cooling system, fuel dilution & lubrication.
Test and interview, as well as result information, will be done in the same day.
Those whoe interested may submit their CV to :
recruitment@ frhbindonesia. com or rarihidayat@ gmail.com
Thanks and regards,
R. Ari Hidayat
PT. Falah Rima Hudaity Bersaudara
Jl. Pemuda No 10 Kav 79 Jakarta 13220
Tel. +62214703140 Fax. + 622147882280
E-mail : recruitment@frhbindonesia.com
Website : www.frhbindonesia.com
Min score of writting test must be 65%. No interveiw for the applicant who fails to get the lowest limit.
For electrical technician, the subjects of writting test are : basic knowledge of electrical, alternators, transformers, motor & motor control, engine controls, power, electronics, protection & safety.
The subjects of mechanical technician tests are about 4 stroke cycle, low engine power output, turbo charging, engine smoke, cooling system, fuel dilution & lubrication.
Test and interview, as well as result information, will be done in the same day.
Those whoe interested may submit their CV to :
recruitment@ frhbindonesia. com or rarihidayat@ gmail.com
Thanks and regards,
R. Ari Hidayat
PT. Falah Rima Hudaity Bersaudara
Jl. Pemuda No 10 Kav 79 Jakarta 13220
Tel. +62214703140 Fax. + 622147882280
E-mail : recruitment@frhbindonesia.com
Website : www.frhbindonesia.com
Urgent Requirement in Mining Industry
a Coal Mining Operation in Kalimantan Island require several positions as below:
1. Washing Plant Supervisor, location: Kutai Barat
Requirements:
S1 Degree in Industrial/Mining/ Electrical Engineering/ Geology
1 – 2 years working experience in Mine Operation
Having knowledge in transportation and safety
Having understanding of washing plant process, stockyard management
Familiar with conveyor and crushing system
Fresh Graduate welcome to apply
2. Port Stockyard Supervisor
Requirements:
S1 Degree in Mining Engineering
Familiar with mining software is preferably
Experience in Mine operation or at least in Heavy Equipment/Industry would be preferable
Fresh Graduate welcome to apply
4. General Affair Supervisor
Requirements:
S1 Degree in any field
1 – 2 years working experience in General Affair (Industrial field)
Fresh Graduate welcome to apply
Please send resume to the following address:
feindy-prakoso@ jda-indonesia.co.id
1. Washing Plant Supervisor, location: Kutai Barat
Requirements:
S1 Degree in Industrial/Mining/ Electrical Engineering/ Geology
1 – 2 years working experience in Mine Operation
Having knowledge in transportation and safety
Having understanding of washing plant process, stockyard management
Familiar with conveyor and crushing system
Fresh Graduate welcome to apply
2. Port Stockyard Supervisor
Requirements:
S1 Degree in Mining Engineering
Familiar with mining software is preferably
Experience in Mine operation or at least in Heavy Equipment/Industry would be preferable
Fresh Graduate welcome to apply
4. General Affair Supervisor
Requirements:
S1 Degree in any field
1 – 2 years working experience in General Affair (Industrial field)
Fresh Graduate welcome to apply
Please send resume to the following address:
feindy-prakoso@ jda-indonesia.co.id
Senior Materials / Corrosion / Integrity Engineer
VACANCY
IONIK CONSULTING, a trading division of PT. Wood Group Indonesia (WGI), are specialists in materials, integrity, and corrosion management, primarily focused on onshore and offshore oil/gas facilities. IONIK is a JP Kenny company – for more information, please see www.ionik.net. IONIK is currently looking for qualified and experienced individuals to join our Consulting Services team:
Senior Materials / Corrosion / Integrity Engineer
• 5 – 15 years of experience.
• Degree Qualified.
• Oil & gas experience is preferred.
• Some practical `hands on' field experience preferred.
• Exposure to a range of asset types (pipelines, process plants, structures, subsea) would be beneficial.
• Experience and exposure in the following areas will be highly regarded:
o Material and coatings selection and application
o Linepipe manufacture
o Cathodic Protection systems
o Familiarity with Risk Assessment principles, processes and implementation
o Corrosion assessment, modeling and calculations
o Fitness for Service assessment to relevant codes
o Failure Analysis or Root Cause Assessment
o Inspection program development and management
o Asset Integrity Management
• Ability to work in a team environment supporting other project disciplines.
• Excellent written English skills are required.
• Experience preparing Technical Reports is essential.
• Experience preparing Proposals and giving Presentations would be beneficial.
Interested applicants are requested to submit their detailed Curriculum Vitae in writing & stating the code no later than 2 weeks from today to:
HR Department
Email : recruitment.jakarta@ptwoodgroup.co.id
All applications will be treated with Strict; Confidence & Only short-listed candidates will be notified
IONIK CONSULTING, a trading division of PT. Wood Group Indonesia (WGI), are specialists in materials, integrity, and corrosion management, primarily focused on onshore and offshore oil/gas facilities. IONIK is a JP Kenny company – for more information, please see www.ionik.net. IONIK is currently looking for qualified and experienced individuals to join our Consulting Services team:
Senior Materials / Corrosion / Integrity Engineer
• 5 – 15 years of experience.
• Degree Qualified.
• Oil & gas experience is preferred.
• Some practical `hands on' field experience preferred.
• Exposure to a range of asset types (pipelines, process plants, structures, subsea) would be beneficial.
• Experience and exposure in the following areas will be highly regarded:
o Material and coatings selection and application
o Linepipe manufacture
o Cathodic Protection systems
o Familiarity with Risk Assessment principles, processes and implementation
o Corrosion assessment, modeling and calculations
o Fitness for Service assessment to relevant codes
o Failure Analysis or Root Cause Assessment
o Inspection program development and management
o Asset Integrity Management
• Ability to work in a team environment supporting other project disciplines.
• Excellent written English skills are required.
• Experience preparing Technical Reports is essential.
• Experience preparing Proposals and giving Presentations would be beneficial.
Interested applicants are requested to submit their detailed Curriculum Vitae in writing & stating the code no later than 2 weeks from today to:
HR Department
Email : recruitment.jakarta@ptwoodgroup.co.id
All applications will be treated with Strict; Confidence & Only short-listed candidates will be notified
Subscribe to:
Comments (Atom)