Tripatra; 2 positions

TRIPATRA (www.tripatra.com) is reputable company in energy sector, has been operating in Indonesia almost 40 years.

Since its establishment in 1973 Tripatra has consistently offered best solutions in energy industry. Our key strength is delivering high quality services in Engineering, EPC, O&M, and project management services to assist world-wide clients in various sectors: Oil & Gas, Downstream & Petrochemical, Mining, and Infrastructure.

Tripatra has strong, committed, and professional management team, fully supported by multidiscipline engineering workforce with high caliber national and multinational expertise.

If you would like to have bright future in Engineering sectors, then we offers you some of positions with following disciplines & qualifications:

System Completion Specialist Instrument
Duties & Responsibilites:
• Develop Commissioning Procedures.
• Follow project commissioning procedures and method statements necessary to safely start up the facilities.
• Review & provide comments on all commissioning procedures prepared by the various project contractors.
• Witness on behalf of company, all contractor Pre-commissioning /commissioning tests and checks and associated I.T.R’s
• Witness all instrument equipment and system testing during pre-commissioning/commissioning and start-up of the central processing facility and offsite infrastructure.
• Ensure the design and construction of the facilities is completed to project specifications, relevant codes and industry norms and verifies design from a commissioning and operability standpoint.
• Strong interpersonal and communication skills.
• Ability to multitask and respond quickly to urgent analysis requests.
• Experience in all HSE requirements.
• Experience in updating of specification sheets, instrument loop diagrams and hook –up in tools software.
• Experience in I/O Mapping ( DCS & PLC’S) UPDATING in tools software, mark up P&ID’s and instrument indexes.
• Preparing daily documentation of work progress.
• Experience in Instrument Installation.
• Experience in Instrument cabling and tubing installation.
• Experience in Loop testing of systems.
• Experience in instrument impulse lines and tubing work.
• Experience with control valves characteristic calibration and overhauling.
•Experience in switches, temperature, pressure, flow and
• Experience in calibration of instrument.

Qualification:
• Educated to B Tech or equivalent in Instrument/Electronic Engineering. Minimum 5 years (preferably 10) experience in field of construction and commissioning of modern control and automation systems including fieldbus technology, petrochemical measurement and control installations. Preferred: HND/ Diploma or equivalent in Instrument/Electronic Engineering. Demonstrate knowledge of requirements for equipment in hazardous areas
• Working experience 5-10 working experience on instrument control system

System Completion Specialist (MV & LV Switchgear)
Duties & Responsibilites:
• Develop Commissioning Procedures.
• Follow project commissioning procedures and method statements necessary to safely start up the facilities.
• Review & provide comments on all commissioning procedures prepared by the various project contractors.
• Witness on behalf of company, all contractor Pre-commissioning /commissioning tests and checks and associated I.T.R’s
• Witness all electrical equipment and system testing during pre-commissioning/commissioning and start-up of the central processing facility and offsite infrastructure.
• Ensure the design and construction of the facilities is completed to project specifications, relevant codes and industry norms and verifies design from a commissioning and operability standpoint.
• Communicating with Operations, Facilities management, site Contractors, vendors and others as necessary to ensure commissioning works are carried out in a planned and co-ordinated manner.
• Liaise with operations department regarding permit to work issues, carry out electrical isolation of HV and LV equipment.
• Signing On and Off Permits-To-Work and ensuring Contractors, Sub-Contractors and Suppliers’ technicians comply with Safety and Isolations Procedures
• Evaluating potential risk utilizing project risk review and assessment tools and procedures.
• Participate in the risk review process and onsite risk assessments
• Knowledge on all the following:
• Carrying out commissioning on a wide range of electrical equipment, including generators, motors, switchgear, transformers, etc.
• Carrying out Commissioning on HV and LV equipment.
• Carry out loop checking, both hot and cold on all types of electrical systems Complete commissioning check sheets, compile punchlists, and mark up As-Builts and vendor information.
• Provide daily reports to the commissioning manager.
• Ability to work with the permit to work system.
• Multi-site onshore/ offshore Commissioning experience required.
• Knowledge of hazardous area equipment.

Qualification:
• Diploma at HNC/HND level (or equivalent) in engineering or related discipline and/or work references demonstrating extensive experience at a similar level
• Extensive relevant electrical commissioning experience in the Oil & Gas industry.
• Experience in the commissioning of HV /MV & LV power distribution systems
• Experience with working in remote overseas locations & with working with a multi-cultural workforce.
• Team player with skills in operational support and development engineering role.
• Highly developed interpersonal skills, verbal and written communication.
• Positively interactive with contractors, operations and project person
• Capable of being certified as a Senior Authorized Electrical Person – for LV and HV systems
• 5 - 10 years working experience on electrical systems.

Please send your complete application letter, certificates, CV, recent photograph, and put job title name as the email subject (not more than 1 MB) to :
recruitment@tripatra.com
cc to :
budi.sinaga@tripatra.com

PT Wira Cipta Perkasa; 6 positions


PT. WIRA CIPTA PERKASA, seeks extraordinarily talented individuals to strengthen our organization for Company Man with position bellow :
1. Work over: 4 (four) persons.
2. Drilling Supervisor: 6 (six) persons
3. Senior Drilling Supervisor: 2 (two) persons
4. Sr. Well Control Specialist Field: 1 (one) person
5. Sr. Well Control Specialist Office: 1 (one) person
6. Sr. Production Reservoir Specialist: 1 (one) person

Personnel Qualifications – Education/Training/Experience:
1. Minimum 10 years experience in COMPANY MAN duty for Oil and Gas Company
2. Should be hold Valid Migas certificate AP III and IWCF/IAPC certificate
3. Familiar to operate computer and reporting
4. Have good drill skill and well control procedure
5. Safety knowledge
6. Experienced as Drilling Superintendent in active Oil/Gas Production
7. Willing to work and train Indonesian co workers/subordinates.

Job Description (basic functions):
1. Supervise the COMPANY’s Drilling rigs and operations in any area of operation.
2. Coordinate with the construction department to facilitate moving of drilling rigs and location building.
3. Assist the Operation Manager in planning well programs, coordinating logistics and preparing budget programs.
4. Carry out any and all duties assigned by the Operations Manager and/or General Manager.
5. Coordinate with Services Co, and logistic department to prepared and sent materials and equipment to support drilling operations.
6. Responsible to supervise Drilling Rig operation done as per program, safety, and cost effective, Reporting to Drilling Superintendent.
7. Prepare daily drilling cost and daily drilling report
8. Make sure all equipment tools, and personnel required for drilling operation available on location in advance to avoid lost time waiting on materials, equipment or personnel.
9. Coordinate with service Co. planning and execution the job done properly, and safely.
10. Coordinate with construction department to facilitate moving rig and location building.
11. Coordinate with Bojonegoro office regarding local issue, and report to drilling Supt.

Specific Primary Duties:
1. Prepare well plans and AFEE’s for drilling and completion for exploration wells.
2. Prepare the drilling prospectus for exploration wells.
3. Prepare scope and specifications of materials, equipment and personnel for tender packages.
4. Prepare tender evaluations
5. Prepare studies of formation pressure and frac gradient for casing design.
6. Prepare studies of casing seat dept determination based on neighboring hole problems.
7. Coordinate the logistics materials, equipment and supplies to support the drilling activities.
8. Maintain liaison with specialized technical personnel during drilling and completion activities.

Please send your application by 2 (two) weeks from the advertisement with Position
On Your Email Subject to PT . Wira Cipta Perkasa up : HRD (Recruitment):
Email: khanwar@wiracp.com